Turnright (Slash Command): Difference between revisions

Latest revision as of 15:53, 28 December 2022

/turnright +, ++, or [0-1]

Turns right.

The command behaves differently depending on the option that is used:

Option	Behavior
+	Activates the command while the key or button is pressed, deactivates when the key or button is released.
++	Toggles the command on and off with each press of the key or button.
1	Activates the command indefinitely, until it is disabled.
0	Disables the command.

The "+" and "++" options are prefixes that must be placed at the beginning of the command. These options are intended to be used with commands that are bound to keys or mouse buttons.
The "1" and "0" options must be placed after the command separated by a space or comma.
By default, this command is bound to the E key as +turnright.

/turnright 1
/+turnright

@@ Line 1: / Line 1: @@
-'''/Turnright''' ''integer''(optional) or '''/turnright''' ''integer''(optional)
+== Slash Command ==
+{{SlashCommandArticle|command=turnright|options=+, ++, or [0-1]|note=Turns right.}}
-The turnright command is a movement toggle command.  When activated without an accompanying number, turnright gives you the current state of turnright on any tab with the 'system' chat channel.
+{{Movement Options}}
+* By default, this command is bound to the E key as <code>+turnright</code>.
-The number is a flag.  If ''integer'' > 0, then the character turns right.  If ''integer'' < 0, the character stops turning right.
+==Examples==
+  /turnright 1
+  /+turnright
-This command can be bound to a key using the standard [[bind]] format (/bind ''trigger'' "turnright ''integer''").  If you wish to add a flag to tell your character to start turning, you will either have to manually type in the command to tell him/her to stop, or add a stop turning bind.
+{{Navbox Movement}}
+[[Category:Movement Commands]]
 [[Category:Slash Commands]]