Tray (Slash Command)
Revision as of 23:44, 22 February 2024 by BlackSpectre (talk | contribs)
Slash Command
/tray
Toggles the power Tray window (including all 3 tray slots within it).
| Tray Slot | Open | Close | Toggle |
|---|---|---|---|
| Tertiary (Alt2) | /traysticky 2 1
|
/traysticky 2 0
|
/traystickyalt2
|
| Secondary (Alt) | /traysticky 1 1
|
/traysticky 1 0
|
|
| Tray Window | /tray
|
- There is no command that opens or closes only the Primary tray slot.
- The /alttraysticky command can cycle through the secondary and tertiary trays slots and close them.
- To open and close the additional (+) floating tray slots, use the window commands. Keep in mind that the tray slot window numbers are invisible, but they do have numbers: Tray1 = first floating tray, tray 2 = second floating tray, tray3 = third floating tray, and so on. For example,
/window_toggle tray3. - The /shownewtray command can open the additional (+) floating tray slots in sequence, but can not close them.
- To change to a different Power Tray number, the various "trays_tray" commands are the most versatile to use (see the navbox below).
- To activate Power Icons (i.e. powers) in specific Power Slots use the /Powexec_tray command.
Example
/tray
Also