Tray (Slash Command)

Slash Command

/tray

Toggles the power Tray window (including all 3 tray slots within it).

The following commands open and close the tray slots in the Tray Window:
Tray Slot	Open	Close	Toggle
Tertiary (Alt2)	`/traysticky 2 1`	`/traysticky 2 0`	`/traystickyalt2`
Secondary (Alt)	`/traysticky 1 1`	`/traysticky 1 0`
Tray Window			`/tray`

To open or close the Secondary and Tertiary tray slots use /traysticky (see above).
There is no command that opens or closes only the Primary tray slot.
The /alttraysticky command can cycle through the Secondary and Tertiary tray slots and close them.
To open and close the additional (+) Floating Tray Slots, use the window commands. Keep in mind that the tray slot window numbers are invisible, but they do have numbers: Tray1 = first floating tray, tray 2 = second floating tray, tray3 = third floating tray, and so on. For example,
/window_toggle tray3. You can open up to 8 additional floating tray slots.
The /shownewtray command can open the additional (+) floating tray slots in sequence, but can not close them.
To change to a different Power Tray number, the various "trays_tray" commands are the most versatile to use. For example, /goto_trays_tray.
To activate Power Icons (i.e. powers) in specific Power Slots use the /Powexec_tray command.

/tray