Showfps (Slash Command)
Jump to navigation
Jump to search
Slash Command
/showfps [0-3]
Displays the client's current framerate measured every decimal seconds.
- /showfps 0 will display the camera's POS and PYR coordinates, useful for demo editors and for finding badges and such. In first-person mode, the camera coordinates will match your character's location, except for the height.
- /showfps 1 will display only the FPS
- /showfps 2 will display the CAM POS and PYR under the FPS
- /showfps 3 will display the CAM POS and PYR in large type at the left of the screen.
Note that this is a software estimate of the FPS your game client is capable of at the moment based on Storage/GPU/CPU resources; it is not indicative of your actual hardware frame rate.
Example: It is possible on a 60Hz display that ShowFPS shows a number as high as 320, even though only 60 FPS is being realized by your hardware because that is the refresh rate limit of both your display and graphic card display mode. However, if the ShowFPS value shows a rate below 60FPS, it is accurate as your system is likely under load.
Example
/showfps 1
See Also